● Pen Manuals & etc. info.6
How to remove / install the nib removing and installing the nib is at your own risk! I am not responsible for the consequences of your mistakes please be careful ★removing the nib. 1. grip the nib with thumb and index finger(nib surface facing the ceiling) wiggle the nib left and right, at the same time pull on the nib. keep repeating until be is pulled out. then remove the feed. 2. if the nib cannot be removed with above meth..
how to increase the flow of the eureka ebonite feed *this tutorial should be done at your own risk! i am not responsible for negative consequences. *latest feed versions are already modified with increased flow, so don't do this. if you want greater flow, you have to widen the horizontal slot (indicated with a red arrow below). widen the top part of the horizontal slot. if needed, widen all the way around. use tools such: precision triagle file p..
Tips for installing / removing ink converter when new, installing converter feels quite tight. this is to ensure leakproof seal, for years and years. when worn down a bit, this will become much easier. When installing/removing ink converter on grip section, a bit of twist will make the process easier. slight wiggling achieves the same effect. you can install/remove in straight motion without twist/wiggling, but it will require more force (..
How to take care of the Urushi products ◆urushi maintenance◆ Although Urushi doesn't need maintenance due to its superb durability, following maintenance will make a difference in the long run. ◆It takes 6 months to reach near full hardeness, so avoid dropping, sudden shocks, etc. ◆Do not expose the urushi to direct sunlight for prolonged period of time. This will cause the surface of urushi to deteriorate eventually. *sunlight 50cm~1..
How to take care of Silver Nib and Ebonite parts ◆How to use the silver cleaning fluid◆ Shake the bottle well. Dip the silver nib all the way. (It is totally okay if ebonite/urushi is exposed to the fluid, just flush well with water afterward) Stir the nib while in the fluid (do not rub the nib against the inner part of the bottle). remove the nib and check if the tarnishing is removed. If not removed completely, repeat the process. After sati..
About me & my Contact Info. Dear Visitors, Greetings, visitors of my homepage. You are warmly welcomed here. I am known as "The Fountainpen Researcher" in South Korea. I started using Fountainpens in middle school, merely by chance. I started grinding nibs in college years. during military service, i designed fountainpens, and machines required to make them. after military service, i started making machines required for fo..