Go To Article
● On Sale


by Eureka_Admin

For purchase, email me: beatmaster90@naver.com

purchase method: paypal


<Product Details>

●These are custom designed barrel and cap for : nib section(nib, feed, grip) of other fountain makers such as platinum, sailor, pilot, parker, etc.

●The barrel and cap is made from high quality japanese ebonite.

●Rugged design to resist cracks, and last for years and years.

●Very good value for the price. Usually, urushi coating service alone will cost >$100 and months of wait time.

●On top of the ebonite material, a Tamenuri urushi coating has been applied (100% highest quality Korean urushi, one of the best quality in the world). Tamenuri is a finishing technique, where two or more urushi colors are applied, on top of each other. As time passes, exposure to natural/artificial lighting will lighten the outer Dark urushi, which reveals the undercoat urushi color.

●Self-developed, 4th Gen. Eureka Urushi techinique used to achieve high quality urushi finish.

●Urushi coating has been dried long enough to resist finger nail scratches (over 2.5 Mohs hardness). Although it can be used as a daily pen, it takes 6 months to achieve near full hardness. Urushi will continue to get harder even after 2 years!

please becareful for several months! (avoid drops, etc.)

Automotive paint = 4~5 Mohs hardness maximum

Urushi = 6 Mohs hardness (same as glass)

A properly cared urushi will easily outlast its owner's lifetime. oldest urushi in japan dates back 9000 years!!!

●Urushi finishing is superior in terms of longevity and feel, compared to polished ebonite.

polished ebonite will lose its shine as it is exposed to UV/artificial lighting, and becomes cloudy as it loses shine. Also, Ebonite is easily scratched. Urushi, on the otherhand will keep its shine much longer and is less scratch prone ( = glass hardness).

●Ebonite is the perfect material to coat urushi with. This is because Ebonite surface is porous and rough. This special surface characteristics of ebonite actually absorbs urushi into the surface. The result is a very solid bond between ebonite and urushi. The only proper way to remove urushi from ebonite is to sand away with sandpaper (9 Mohs hardness) or to use urushi solvent (terpentine).

Plastic surface on the otherhand, will not accept urushi very well. This is because plastic surface is slippery. Urushi applied on plastic surface will not last, and gets peeled off eventually.


<Urushi Finish Grade>

B   :Acceptible

B+ :Fair

A   :Good

A+ :Very Good

S   :Nearly Perfect (few tiny flaws)

S+ :Perfect (few microscopic flaws) <- 100% perfection is nearly impossible


<Available Stocks> <---- finished on: December 1st of 2019


Urushi Aged 3 months



mini: 140/65/80mm (closed, cap, barrel), *mini will no longer be produced anymore a few are left.

standard: 157/75/90mm (closed, cap, barrel)



1) B & C for Platinum Century Gathered Combo (Dard Red/Black Tamenuri)  

    "Standard" size, (The last one, no longer produced anymore)

     A ($110)


2) B & C for Platinum Century (Dard Red/Black Tamenuri) 

    "Standard" size

     B+ ($100)


3) B & C for Platinum Century (Dard Red/Black Tamenuri)

    "Standard" size

     A+ ($120)


4) B & C for Platinum Century (Dard Red/Black Tamenuri)

    "Standard" size

     A+ ($120)


5) B & C for Platinum Century (Dard Red/Black Tamenuri)  

    "mini" size

     A+ ($110)


*For High Quality Close up View :

    Click on Image first -> Right click -> "Open image in new tab" -> Zoom


The Pictures were taken directly under a bright light source to bring out every bit of flaws as possible.

also the white level is boosted

with usual lighting, you pretty much won't see those flaws.



from left 1~5


1. gathered combo fits century really well, gathered fits but grip end section will be slightly larger than the barrel's front part.











Size Comparison (photo white level boosted to further reveal red color)

from left: platinum century(mini), platinum century(standard), platinum century gathered combo


1) Barrel and Cap for "Platinum Century & Gathered" combo (both compatible, although not 100% perfect fit for gathered)

(will no longer be produced, "gathered only" barrel and cap will be made in the future)


century grip section installed 

*dust on the surface, not flaw

gathered grip section installed

as you can see slight inaccuracy @ the end of grip section (making both models compatible cannot be perfect)

2) barrel and cap for "platinum century #3776" (standard size)

standard century also fits president, but as you can see in the picture, there may be a small difference at the end of the grip section where the barrel meets.



3) barrel and cap for "platinum century #3776" ("mini" - same length as original plastic barrel)


◆Email: beatmaster90@naver.com

◆Instagram: MechGyver_Eureka